Wood Flooring Installation Conditions 

Professional Surveyor Boards » Ask an Expert » Wood Flooring Installation Conditions

Name Message
Posts: 839

Joined: 8/9/2016
Topic  Wood Flooring Installation Conditions       Flag »  Reply »
1, the ceiling must have completed projects, including fire engineering. 2, must have completed the wallpaper, paint works. 3, must have completed underground duct engineering, computer lines and any related electrical and mechanical engineering. 4, the ground should be hard, no grease, sand grains, ground free from shell cracks and other phenomena. This is because the installation materials and workers to avoid stains dirty scratch the soles PVC plastic flooring. Avoid dropping paint stains on the floor, blurred wooden floors. If the ground is not ready Mechatronics Engineering, Electrical and Mechanical Contractors will be good PVC plastic flooring will be installed after the lift of their work, it will affect the quality and appearance of the whole project. If the ground is not enough cement grade, from sand, oil stains, have an effect on bond strength glue and paving quality, it will likely lead to blistering floor. If you have a sand floor, or from the shell will crack the top floor will be paved from a small bump will be white and broken after local force. 5, filled or leveled ground, the ground must be flat and smooth, no bump where. With two meters ruler check ups gap error should not exceed 2mm. 6, after the maintenance of cement solidification, the ground can not have moisture and water. 7, before the transfer site, we Ji Jia plastic construction workers cleaned up the site generally, other types of work are required to leave the scene. 8, the indoor temperature must be above 15 ??. If the ground is too wet, the floor and the ground can not be tightly bound together, the glue will lose effect. Try to avoid other types of dust and debris to get dirty and damaged the glue on the ground floor. Temperature is not enough will cause the glue to quit, unable to make PVC plastic floor and ground bond. Because wood is tightly bonded to the ground, if there is any place uneven ground, it will be directly reflected in the floor surface. the article come from:Can I Use Composite Board On Steps maybe you also like: Can Composite Wood Be Used For Shutters 24 round pool deck ideas Suggested Installation Cost Of Installing Wood Haven Ceiling Planks
  Monday, August 22, 2016 at 2:45:40 AM
Posts: 257

Joined: 8/9/2018
Reply  Re: Wood Flooring Installation Conditions Flag »  Reply »
Every Details
  Saturday, December 15, 2018 at 1:33:28 PM

Professional Surveyor Boards » Ask an Expert » Wood Flooring Installation Conditions

» Reply to Wood Flooring Installation Conditions Topic

In order to post a new message, you must first be logged into an account.