Electromechanical Assembly 

Professional Surveyor Boards » General Surveying » Electromechanical Assembly

Name Message
coolerfreezer111
Posts: 926

Joined: 11/15/2018
Topic  Electromechanical Assembly       Flag »  Reply »
Fused disconnects are used to provide over-current protection for motor in the same manner as a breaker. Instead of opening contacts, fuses fail opening the circuit. When overcurrent protection is provided by fuses, a disconnect switch is required for manual opening of the circuit. The disconnect switch and fuse block are typically one assembly. The hinge and blade connections on the switch are a typical source of overheating. 

High resistance from HELTRONICS overuse or underuse is usually the cause. Fuse clips are also a weak connection point for some disconnect designs. Different types or manufacturers of fuses of the same amperage may produce different thermal signatures. While different size or amperage fuses will also have a different thermal pattern, fuse bodies may appear warmer than the rest of the circuit due to conductor size.
  Tuesday, July 21, 2020 at 4:28:09 AM

Professional Surveyor Boards » General Surveying » Electromechanical Assembly

 
» Reply to Electromechanical Assembly Topic

In order to post a new message, you must first be logged into an account.