Solid Wood Floor Basics Maintenance 

Professional Surveyor Boards » Ask an Expert » Solid Wood Floor Basics Maintenance

Name Message
Posts: 839

Joined: 8/9/2016
Topic  Solid Wood Floor Basics Maintenance       Flag »  Reply »
"Solid wood flooring moisture content is generally maintained from 8 to 13%, so that the floor under normal circumstances, is generally not a problem, but improper use can also cause wood flooring quality problems, such as: water soaked or alkaline, soapy water scrub, this will undermine the brightness of paint; the bathroom floor and the room is not ready isolation; summer did not pay attention to pull the curtains so the floor window after burning sunlight discoloration cracking; or the open air temperature is too low, so that day and night temperature changes too much, causing the expansion or contraction of the floor too severe and cause deformation cracking Therefore, the use of solid wood flooring must pay attention to the following maintenance is solid wood flooring in the course of some maintenance tips.: 1, solid wood flooring in the maintenance, must pay attention to keep the floor dry, clean and avoid contact with large amounts of water. Not allowed to use alkaline, soapy water and other corrosive liquid to clean, so as not to damage the paint film; you can wipe with a cotton mop wrung, rubbing with steel wool in case of stains, do not use wet mop, gasoline, flammable materials and high temperature wipe the liquid. 2, from time to time to play a wax, depending on the time interval floor paint finish may be recommended at least annually waxing maintenance twice. The method is to use a damp rag and wipe the floor wax, floor wax should be evenly spread on the floor surface and allowed to "soak", and other slightly dry with a dry, soft cloth to wipe back and forth on the floor, until smooth and translucent . 3, if you are not careful or omissions pour water on the ground, must be promptly wipe clean with a soft, dry cloth. You can not directly make clean after sun exposure or baking furnace, in order to avoid excessive drying, dry floor. 4, after the pavement of the floor should minimize direct sunlight to avoid excessive exposure to ultraviolet light paint dry and aging in advance. 5. Do not put cigarette butts or matches or other fire tossed on the floor, to avoid burning the floor surface; avoid sharp, sharp objects scratching the weight of long and heavy items. 6, paved floor as long-term residence, should not cover with plastic sheeting or newspaper. Over time the film is tacky and dull. At the same time avoid the high temperature of the object in direct contact with the floor. In addition, solid wood flooring in the course, if that individual floor warped or loss shall be promptly taken from the floor, stripped off the old glue and ash, painted with the new plastic compaction; if individual floor paint damaged or Lu Bai, available 400 water sandpaper dipped in soapy water polished and clean, to be dry, partial complementary color, color after dry, then brush a paint dry for 24 hours, with 400 water sandpaper, then rub wax polishing. " the article come from: Wood Composite Boat Decks maybe you also like: Composite Panels Australia deep wood grains composite decking sheet Cheap Rubber Porch Flooring
  Wednesday, September 21, 2016 at 3:33:58 AM

Professional Surveyor Boards » Ask an Expert » Solid Wood Floor Basics Maintenance

» Reply to Solid Wood Floor Basics Maintenance Topic

In order to post a new message, you must first be logged into an account.