Notice on Plastic and Wood Installation 

(1) when the plastic wood for railing, it is necessary to lined steel pipe or square steel, and with the floor to be sure that the solid, the distance from the railings every 450mm request column to prevent the deformation of falling.

(2) plastic wood for the pavilion or flower racks, to consider the coefficient of thermal expansion, and columns and beams must be lining the square tube, and vertical to convergence firmly.

(3) plastic wood has certain plastic properties, so when the length is greater than 3 meters, the data have some twists and turns, the device is simply corrected to normal, if the wood section is a profile, the relative increase in the degree of deformation. The device is capable of fundamental correction in place.

(4) When the profile upright device, and the length is greater than 3 meters, each side to use four pairs of clamping screws. And the vertical screw distance above 40cm, so that each end of the four screws even force.

Maybe you also like:
High performance composite wall panel
Solid Composite Wood Flooring
Outdoor WPC Pergola